send link to app

How many mph?


4.8 ( 7728 ratings )
여행 라이프 스타일
개발자: Shinji Yamada
1.99 USD

This application can measure the speed of the ride now.
It can measure with various vehicles such as bicycle, motorcycle, car, train, bus, airplane, ship. Of course, even if you are not on a ride, such as walking or jogging, you can measure the speed if you even launch the application.
Since you can also measure elapsed time, travel distance, maximum speed, average speed at the same time as speed, I would be happy if you could use it as a kill time or a simple record of traveling time that you commute to work, school, travel etc.
Furthermore, since my whereabouts are always displayed on the map, you can know the current speed while checking your current location on the map.

Example of use)
· Measurement of maximum speed and lap time at bicycle commuting and commuting.
· When you thought that "How many miles per hour, right now?" while riding a train.
· Measurement of travel distance and travel time during travel.
· When you are concerned about the speed of stable flight of an airliner.
· When you are concerned with the current location check and speed while getting on the bus.
· Measure distance and traveling time from home.
· Measurement of average speed during car movement.

Ask)
1. Since this application performs measurement of various data by GPS, display of present location by map and tracking, please allow GPS usage on the terminal (OK even if it is in use).
2. Please use with iOS 10 or later models.
3. Please start the application under mobile data communication or Wi-Fi environment. (Only at startup)

Method of operation)
1. Press the START button to start tracking and measurement of various data. (During tracking)
2. Press the STOP button to stop tracking and measurement of various data. Press the button (START button) again to resume measurement.
3. Press the RESET button to reset track erasing and various data display to 0. It can be used even during tracking.
4. Press the SAVE button to save the tracking data and various measurement data. However, it can not be saved during tracking. In addition, because save data is only one, it always performs overwrite save, so please be careful when saving.
5. Press the LOAD button to load various SAVE data. Load the SAVE tracking data so that the final point of the SAVE tracking data becomes the center of the map. However, it can not be loaded during tracking.
6. By pressing the menu button (> button on the left side of the Current Speed ​​window), you can set the unit of distance, the unit of speed, and the limit value. The limit value is the maximum value of the LED gauge (rightmost side). The LED gauge with the limit value as the maximum value will be displayed in conjunction with the speed. In addition, even if the actual speed exceeds the Limit value, the LED gauge will be the maximum display and the speed measurement and display will not be affected.

Notes)
1. In order to improve the positional accuracy at the time of tracking, this application acquires the position by GPS at the same time as it starts up. We always fine-adjust the position of the map so that the center of the map becomes the current location. Due to this effect, if the location of the loaded tracking data is different from the current location, please note that the map may move to the current location immediately after loading and it may be difficult to check the loaded tracking data.
2. If the movement speed is too fast with respect to the maps enlargement rate, updating of the map can not catch up, and the marker at the center of the map may disappear. In that case, move the map a little with your fingers, or press the STOP button and press the START button again to restore the marker. In addition, even in the state where the marker disappears, various measurements are continuously performed, so there is no influence on the data.